2012 Ford Escape
Mileage
95,980
Service Date
8/8/2024
Services Performed
- Diagnose cause of hard shift
- Diagnose air conditioning system
- DRIVE BELTS – INSPECT CABIN AIR FILTER – REPLACE – [If equipped.] ENGINE COOLANT – REPLACE – [Initial replacement at 100000 miles or 72 months; every 50000 miles or 36 months thereafter.] ENGINE OIL – REPLACE ENGINE OIL FILTER – REPLACE SPARK PLUGS – REPLACE ENGINE OIL MONITOR – RESET – [Reset the oil life monitoring system after each engine oil and filter change. Press and release the SETUP button to display "OIL LIFE XXX% HOLD RESET = NEW" Press and hold the RESET button for two seconds and release to reset the oil life to 100%.]
- Check to see what's hanging
- SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace -Raer Both – [DOES NOT include disassemble or alignment.]
- SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace -Front Both – [DOES NOT include disassemble or alignment.]
- Place vehicle on alignment rack, attach equipment, measure caster, camber and toe. Compare to vehicle specifications. Set and adjust all approved alignment angles with allowable specifications.
- ELECTRONIC IGNITION (MINOR) – Tune – Limited,XLT,In-Line4 – [Includes: Check compression. Clean or replace Air Cleaner Element and Spark Plugs. Inspect or replace Coil Boots or Ignition Cables.]
- COOLANT FLUSH
- ALTERNATOR DRIVE BELT – Remove & Replace – Limited,XLT,In-Line4 – [Includes: Serpentine and V-Belt type Belt(s).]
- Oil Change
- TRANSAXLE ASSEMBLY – Remove & Replace – FWD,2.5L Eng
Joe W. gave our service a 5 star review on 8/14/2024
