Traced down the wire and found the wires to the shift interlock were chafed and broken in multiple spots. repaired the wires and all is working fine at this time.
Rocco C. gave our service a 5 star review on 10/10/2025
Tech inspected and determined that vehicle was in need of the passenger rear upper control arm
Tech inspected and all tires all good and have the correct pressure
CONTROL ARM – Remove & Replace – Upper,w/o Air Suspension,One Side – [DOES NOT include alignment.]
Place vehicle on alignment rack, attach equipment, measure caster, camber and toe. Compare to vehicle specifications. Set and adjust all approved alignment angles with allowable specifications.
Debra K. gave our service a 5 star review on 9/4/2025
Tech inspected and determined that vehicle was in need of the rack opinion and the complete sway bar assembly and both outer tie rods and the driver side front CV axle and the front driver side hub assembly and an alignment.
STEERING GEAR (COMPLETE) – Remove & Replace – 3.8L Eng – [Includes: Adjust toe-in.] – [Includes: Manual and Power Rack & Pinion, Worm & Ball Nut and Rack & Piston Assemblies. Adjust Toe-in on Rack & Pinion models. DOES NOT include transfer of components o
STABILIZER BAR CONTROL LINK – Remove & Replace – Both
TIE ROD &/OR END – Remove & Replace – Outer,Both – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacing Inner Tie Rod End(s) on some models. If
Place vehicle on alignment rack, attach equipment, measure caster, camber and toe. Compare to vehicle specifications. Set and adjust all approved alignment angles with allowable specifications.
AXLE SHAFT ASSEMBLY – Remove & Install or Remove & Replace – Driver Side – [NOTE: For Independent Suspension Type Axles, Axle Shaft Assembly consists of Axle Shaft, Boots and Joints.]
Mike B. gave our service a 5 star review on 8/23/2025
Tech inspected and determined that the vehicle was in need of the rear axle. Also tech noted that the vehicle is in need of all four ties Asap and then vehicle will definitely need an alignment
AXLE SHAFT ASSEMBLY – Remove & Install or Remove & Replace – AWD Rear Axle,Assembly,Left – [NOTE: For Independent Suspension Type Axles, Axle Shaft Assembly consists of Axle Shaft, Boots and Joints.]
Leo W. gave our service a 5 star review on 8/20/2025
The rear struts need to be replaced because the right rear strut is blowing and leaking. When we replace the struts, we also replace the sway bar links and an alignment is needed. The passenger front wheel bearing has play and both rear parking brake cables are loose and hitting inside of both rear wheels.
Jaqian W. gave our service a 5 star review on 8/8/2025