2017 Chevrolet Equinox
Mileage
110,896
Service Date
6/21/2024
Services Performed
- The exhaust manifold was cracked between cylinders 2 & 3. While inspecting, tech found the front struts were leaking, the sway bar links had play, the left inner and outer tie rod ends had play and alignment was needed.
- SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – Both – [DOES NOT include disassemble or alignment (where applicable).]
- STABILIZER BAR CONTROL LINK – Remove & Replace – Both
- TIE ROD &/OR END – Remove & Replace – Inner,Driver Side – [Includes: R&I Outer Tie Rod Ends.] – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear
- Place vehicle on alignment rack, attach equipment, measure caster, camber and toe. Compare to vehicle specifications. Set and adjust all approved alignment angles with allowable specifications.
- EXHAUST MANIFOLD – Remove & Replace – In-Line4,FWD w/California Emissions – [Includes: R&I Catalytic Converter.]
- DISC ROTOR – Remove & Switch To Correct Side – Front,Both – [Includes: Replace Pads (if necessary). DOES NOT include refinishing.]
- DISC ROTOR – Remove & Switch To Correct Side- Rear,Both – [Includes: Replace Pads (if necessary). DOES NOT include refinishing.]
Nikki G. gave our service a 5 star review on 6/22/2024
